[Wayne]

This how I evension the sequence being flown as far as positioning.
Flying left to right.

1- Takeoff in front of the box. Left 180 degree turn. Right 180 degree turn.

2- Horizontal (Dead) fish. Starts at the back of the box and ends in the front of the box.

3- Tailslide on the left side, front of the box.

4- Torque Roll in front of the box, center. Ends going inverted, high, across the box

5- Pull to vertical at the back of the box. End coming right back at me inverted.

6- Roller will go to the right and end at the back of the box.

7- 3/4 figure 8 will start at the back of the box and end mid box depth.

8- Top Hat will start mid box and fly back to front of the box over the top.

9- Roll and snap will be in front of the box

10- Half square will start at the front of the box and end at the back of the box

11- Roller will start and end at the back of the box

12- 180 degree turn will come in towards the front of the box.


Flown this way or reversed, I see it working.
There are no weird angles that the put subsequent figures off axis.