FlyingGiants Forums - View Single Post

Billa · 06-20-2007, 01:52 PM

Oil in use is Amsoil Sabre Pro 100:1 Pre mix mixed at 80:1 and it is a brand spanking new carb. With my own DA 50 I normally only open up the top plate to inspect the screen and take the needles out and flush what ever possible. I have never taken off the diaphragm side in about 8 gallons of fuel - and I am using Amsoil Dominator 50:1 premix mixed at 40:1. We have a very hot climate but our elevation is only about 700 feet above sea level. Thanks in advance for all advice.

Aamer

06-20-2007, 01:52 PM	#121 (permalink)
Billa Uber Contributer Join Date: Mar 2006 Location: Pakistan Age: 39 Posts: 167	Re: Gas engine tuning for newbies.... Oil in use is Amsoil Sabre Pro 100:1 Pre mix mixed at 80:1 and it is a brand spanking new carb. With my own DA 50 I normally only open up the top plate to inspect the screen and take the needles out and flush what ever possible. I have never taken off the diaphragm side in about 8 gallons of fuel - and I am using Amsoil Dominator 50:1 premix mixed at 40:1. We have a very hot climate but our elevation is only about 700 feet above sea level. Thanks in advance for all advice. Aamer