[rrritchey]

	Quote: Originally Posted by jongurley
	I bet I know your problem,, take plug your batteries into channels ONLY,, 1-8 do not plug a battery into the Battery port on the receiver,, if you don't have any spare channels on the receiver,, take and Y a battery into the throttle channel on the receiver and then Y the other battery into the gear channel or something,, but the key is ,as strange as it sounds do not plug either of the two batteries into the battery port on the receiver,, ,,

Hi,
I don't think you ever need a "Y". I always recommend the two power channels, "A" and "H" get plugged into the first and last channels on a receiver. On a JR receiver this would be throttle and the last "AUX" channel. Then plug in the single wire pigtails in order after the throttle channel and if you have any left over leave them disconnected. For a Futaba receiver you would plug into ailerons and the last aux channel and then start at ailerons and plug in the single leads.