FlyingGiants Forums - View Single Post

boex · 09-20-2007, 05:04 PM

What I did was, first I cut a couple of mm of silicon tubing and placed it on the tip of the glow plug (as insulation) then I wrapped the red cable coming from the switch on the remaining part of the tip and lastly I used a collar to trap the cable. In other words the cable got sandwiched between the silicon tubing and the collar. Hope I make sense.

09-20-2007, 05:04 PM	#4 (permalink)
boex heard your bull, here is mine Join Date: Oct 2006 Location: Miramar, Argentina Posts: 101	Re: On Board Glow Driver What I did was, first I cut a couple of mm of silicon tubing and placed it on the tip of the glow plug (as insulation) then I wrapped the red cable coming from the switch on the remaining part of the tip and lastly I used a collar to trap the cable. In other words the cable got sandwiched between the silicon tubing and the collar. Hope I make sense.