FlyingGiants Forums - View Single Post - Foamy Season is here - Milling Depron Foam -> A How To

Matchless · 10-25-2007, 11:01 PM

This process will work on any foamy design of any size. The benefits are relative to the amount milled out and the thickness of the foam used. For this thread's sake, I'm going to stick to 3mm foam for a typical "Shocky" sized foamy.

You need to start by having the fully cut out foamy ready. You'll also need:

#11 exacto blades & handle
Dremel tool with router attachment
Dremel routing bit
Scrap of plexiglass
3/8" brass tubing
Scrap 3mm depron
6mm depron
Straight edge
Foam Safe CA

10-25-2007, 11:01 PM	#2 (permalink)
Matchless GiantStyle Yapoleno Hucker! Join Date: Jan 2006 Location: Cordova, TN USA Posts: 1,171 Blog Entries: 38	Re: Foamy Season is here - Milling Depron Foam -> A How To This process will work on any foamy design of any size. The benefits are relative to the amount milled out and the thickness of the foam used. For this thread's sake, I'm going to stick to 3mm foam for a typical "Shocky" sized foamy. You need to start by having the fully cut out foamy ready. You'll also need: #11 exacto blades & handle Dremel tool with router attachment Dremel routing bit Scrap of plexiglass 3/8" brass tubing Scrap 3mm depron 6mm depron Straight edge Foam Safe CA