[ken crane]

hmm theres not enough of an adjustment to have the timing so far off with that hall sensor adjustment. with the plug i did change to ngk but only for the reason that the torch brand plug seemed cheap. it could be the ignition module. have tried to remove the plug and rotate the prop shaft back and fourth past the mag to see if you have a good blue spark? also make sure that battery is fully charged. if you accidently reversed the hall effect sensor and the battery lead you casn damage the module as well as they share the same style plug.also you said the hall effect sensor was cracked around one of the holes. does this go into the body of the sensor or just around the hole from tightining it ?