FlyingGiants Forums - View Single Post

coptered · 04-16-2009, 02:46 PM

The EQ6 should work fine. Just change the receiver power inputs from the EQ6 to EC3 connectors. Since you will be powering your servos through the EQ6 you won't be pulling much current through the receiver, so the smaller leads coming from the EQ6 will be fine.

04-16-2009, 02:46 PM	#4 (permalink)
coptered Gettin' Lower! Join Date: Feb 2008 Location: Ashland, AL Posts: 37	Re: JR R922 with EQ6? help The EQ6 should work fine. Just change the receiver power inputs from the EQ6 to EC3 connectors. Since you will be powering your servos through the EQ6 you won't be pulling much current through the receiver, so the smaller leads coming from the EQ6 will be fine.