FlyingGiants Forums - View Single Post

james.l.hill · 06-24-2009, 12:10 PM

Finally found the right forum for this question!! I have SF PE Sport with the Super Reg, I was going to use 2- used Lion 2600's for rcv& servos(8 Hitec 7955's , 1-70 oz. digi for throttle, in 33% Yak). After reading some posts here, I see some are saying A123's work OK with this setup, knowing the current limits & voltage drops with Lion, I would rather use A123's. I'm concerned because SF says their PE's are for Lion batts, but the Pro manual shows Nicd, Nimh, Lion&Lipo's ? Can I safely use this set-up?(A123's) Would you recommend the Super reg too with A123's, or should I leave it out and go with the battshare and 2 failsafe switches/charge jacks instead with the PE.

06-24-2009, 12:10 PM	#4 (permalink)
james.l.hill Mixmaster Join Date: Jul 2006 Location: williamstown,nj Posts: 138	Re: EQ 6 with reg and A123 batts Finally found the right forum for this question!! I have SF PE Sport with the Super Reg, I was going to use 2- used Lion 2600's for rcv& servos(8 Hitec 7955's , 1-70 oz. digi for throttle, in 33% Yak). After reading some posts here, I see some are saying A123's work OK with this setup, knowing the current limits & voltage drops with Lion, I would rather use A123's. I'm concerned because SF says their PE's are for Lion batts, but the Pro manual shows Nicd, Nimh, Lion&Lipo's ? Can I safely use this set-up?(A123's) Would you recommend the Super reg too with A123's, or should I leave it out and go with the battshare and 2 failsafe switches/charge jacks instead with the PE.