FlyingGiants Forums - View Single Post

mikeyj86 · 07-01-2009, 11:57 AM

Well I just got my 1st giant, a used Handar 9 Cap 33%. It has a ZDZ 80 RV-J with a JR 1400mah 4 cell on ignition. A spektrum AR7000 receiver powered by 2 2700mah 5 cell packs, 4 Hitech 5645 MG's on the ailerons(2 per wing), 2 Hitech 5645 MG's on elevators, 1 Hitech 5735 on rudder(pull-pull), and a Hitech 525BB for both the throttle and choke. Just wondering if this is a decent set up or what you more experienced guys would change. I was thinking of switching the receiver to either a R922 or an AR9100 for the multiple remote receivers and the built in powerbus. Any advice you guys may have would be greatly appreciated, thanks

07-01-2009, 11:57 AM	#1 (permalink)
mikeyj86 VMGR-452 Yankees Join Date: Jan 2006 Location: Newburgh New York, Amelia Ohio Age: 23 Posts: 466	my 1st "GIANT"... set up questions Well I just got my 1st giant, a used Handar 9 Cap 33%. It has a ZDZ 80 RV-J with a JR 1400mah 4 cell on ignition. A spektrum AR7000 receiver powered by 2 2700mah 5 cell packs, 4 Hitech 5645 MG's on the ailerons(2 per wing), 2 Hitech 5645 MG's on elevators, 1 Hitech 5735 on rudder(pull-pull), and a Hitech 525BB for both the throttle and choke. Just wondering if this is a decent set up or what you more experienced guys would change. I was thinking of switching the receiver to either a R922 or an AR9100 for the multiple remote receivers and the built in powerbus. Any advice you guys may have would be greatly appreciated, thanks __________________ Hangar 9 33% CAP 232 E-flite Sukhoi 26m Hangar 9 33% Edge 540 N.I.B