Review: YTV Servo Cycler - FlyingGiants Forums

Product Review:
YTV Servo Cycler

Perspective By:
Boulder

Manufacturer Contact:
York Electronics
1005 S. Josey Ln.
Suite 208
Carrollton, TX 75006

Manufacturer Website:
http://www.york-electronics.com

FlyingGiants Ratings:

Packaging:
Kit Quality:
Ease of Build:
Huckability:
Overall:

Introduction

York Electronics has come up with an awesome product called a Servo Cycler. Plugging a power source and 3 to 4 servos into this device allows you to automatically center your servo before installation and cycle your servo for testing purposes. The cycling process can be done in a sweeping mode or stepping mode, in or out of your model.

Out of the Box:

When my test unit arrived the first thing I thought was, "That's it? This is all there is?" Let me tell you folks, this is all you need! The Servo Cycler is an extremely compact, easy to use product that allows you to test your servos in or out of your model.

Product Specifications

YTV Servo Cycler

Computer center                                                   Move to any position
9 Sweep speeds                                                    Runs 3 or 4 servos
End Point programming                                          Protected pins
Memory without battery                                       H.D. Power buss
4-5 cell operation                                                   LED Mode indication
Extended range                                                      Simple to use

What does it do?

Here comes my favorite part of any review, telling you what it does and how well it does it!

The Servo Cycler will help you efficiently install your servos, test your servos for any internal issues and test your surfaces after the install for possible problems with your setup. How much more can you ask of a product?

In the first of the above pics, the Servo Cycler will automatically center your servo, green light is on. You can also automatically center the servo at any time by pressing the CENTER button.

In the second pic, the Servo Cycler is in Offset Mode, allowing you to hold the UP or DOWN button and make the servo sweep in the desired direction. In addition to the sweeping you could just tap the buttons and the servo will step in the desired direction, red light is on.

The third pic shows the servo in the Sweep Mode, moving in both directions from end point to end point. This mode can be in any of 9 different speeds to check the strength of your servos systems, red and green lights are on.

If your servo is installed in your model, you may want to set end points that are less than the factory throws of the servo. This can be programmed by holding the UP or DOWN button and tapping the CENTER button when the desired position is reached. You may then hit both the UP and DOWN at the same time which will set the Servo Cycler to SWEEP mode, thereby testing your servo without allowing the control surfaces to go past their desired maximum throw.

Please see the attached simple to follow chart for the different modes and descriptions.

The perfect installation tool

I would highly recommend using this product even if only to make sure your servos are centered upon installation. Doing this in advance will speed up your servo installation and the centering of your control surfaces, all without the transmitter.

Of course the fine tuning will need to be done once the receiver is installed, an easy task if the servos are pre-centered upon installation.

Conclusion

I'm extremely happy to have been asked to do this review. My only issue is that I wish I had it sooner, I just got done with a build where this product would have come in very handy.

In my opinion, there isn't a better product, that I'm aware of, that will test your servos and automatically center them for installation purposes at a better price.

In a real life test, a buddy of mine was having a throttle issue on his 40% Extra, something was causing the throttle to "blip" at times when he swears it wasn't him. We pulled the servo and put it on the Servo Cycler. Putting the Cycler in Sweep Mode found an issue with either the motor or the pot in the servo, it's now on it's way back to the manufacturer for a more indepth check up. Now that's what I call a valuable product!!

York Electronics
1005 S. Josey Ln.
Suite 208
Carrollton, TX 75006
http://www.york-electronics.com

Review: YTV Servo Cycler

Review: YTV Servo Cycler

Published by


Boulder It's official, thanks Verne... Join Date: Jan 2006 Location: Universal City, TX Age: 49 Posts: 10,136

06-09-2007, 08:53 AM	#2 (permalink)
porcupineace I'm only 'twee years old Join Date: Feb 2007 Posts: 1,213	Re: Review: YTV Servo Cycler * Last edited by porcupineace; 06-14-2007 at 06:57 AM.

06-09-2007, 08:56 AM	#3 (permalink)
porcupineace I'm only 'twee years old Join Date: Feb 2007 Posts: 1,213	Re: Review: YTV Servo Cycler * Last edited by porcupineace; 06-14-2007 at 06:57 AM.

06-09-2007, 11:23 AM	#4 (permalink)
Gary Warner Flyin' Around Join Date: Mar 2007 Location: Carrollton TX Posts: 7	Re: Review: YTV Servo Cycler I don't know what's wrong with the link. Here's a working link: http://www.york-electronics.com

06-09-2007, 11:36 AM	#5 (permalink)
porcupineace I'm only 'twee years old Join Date: Feb 2007 Posts: 1,213	Re: Review: YTV Servo Cycler * Last edited by porcupineace; 06-14-2007 at 06:56 AM.

06-09-2007, 11:50 AM	#6 (permalink)
Boulder It's official, thanks Verne... Join Date: Jan 2006 Location: Universal City, TX Age: 49 Posts: 10,136 Blog Entries: 3 Awards Showcase Total Awards: 1	Re: Review: YTV Servo Cycler Thanks for posting that link Gary. I copied the link directly off the literature that was sent with the Servo Cycler which didn't have the "http://" included. I should have added it to the link when I did the review, sorry about that. All fixed __________________ Ken Thompson Fellowship of Christian Modelers http://www.fcmodelers.com *Team Black Magic* http://www.customairframes.com *Team DragonFire* http://www.dragonfirecustoms.com

06-10-2007, 07:24 AM	#7 (permalink)
porcupineace I'm only 'twee years old Join Date: Feb 2007 Posts: 1,213	Re: Review: YTV Servo Cycler * Last edited by porcupineace; 06-14-2007 at 06:56 AM.

Review Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Review	Review Starter	Category	Comments	Last Post
Kit question...Dalton extra 260	TonyThomasian	Giant Scale Airframes and Kits	7	08-25-2008 12:39 AM
8711 or 5955	kim3D	General Discussions - Giant Scale	103	04-02-2008 06:08 PM
Hitec fans what do you think about this?	caurimare	Transmitters, receivers, servos & Navigation	27	11-01-2007 01:56 AM
Servo arm / Servo! please help!!!!	niccolo98	General Discussions - Giant Scale	10	02-07-2007 09:18 PM
Glowing servo	Flyinfool	Transmitters, receivers, servos & Navigation	5	05-03-2006 09:17 AM


Home Forum Navigation Forum Home Post Hucker (realtime) New Posts Private Messages Search FlyingGiants Subscribed Threads My FlyingGiants Forum Policies Memberlist Blogs! Bloggin! Home Getting Started New Entries New Comments SwapShop Browse All Categories Post An Ad! Media Gallery Photo Gallery ->> Upload Media! Video Gallery ->> Upload Media! Big Events Gallery ->> Upload Media! Killer Desktop Backgrounds Best of The Giants! Media By Member Media Gallery Settings Product Research Product Perspectives Hobby Products Database Essentials 2008 Event Calendar ->> Add an Event! Official Community Calendar FlyingGiants Events ->> 2007 FG HuckFest Series 2007 Fliton Indoor Challenge 2006 Giants Style Video Contest 2006 Huckfest! Fly-in 2008 FG Event Coverage GroundSchool Chatroom Giant Jargon Links & Friends XML & RSS Feeds FGTV Live! Viewing Room Swag News Archives About About FlyingGiants Meet Our Staff FlyingGiants Sponsors Website Help and Support Peanut Butter Jelly Time Sign Up!


	Please support our sponsors

Currently Active Users Viewing This Review: 1 (0 members and 1 guests)