DX-7 Mixing ?

[starzak]

I am already driving 2 rudder servos with a "Y" on a twin boom aircraft. Is there a MIX that will allow me to drive a nose wheel servo plugged into AUX 1, using the same rudder stick ?

... zak

[smokin]

i ended up being talked into a 9303 to replace my dx7 when it came to mixing difficulties! good luck to you, hopefully you can find less expensive answers than i did!

[bzrogers]

You should be able to use a programmable mix with the rudder controlling your aux channel.

Try setting your mix to 100% Each direction or whatever it takes to make your steering servo move the proper amount and direction.

Good luck

[Sired by Fire]

you could also use a matchbox... some of the scale guys here do that with their jets, you would also have the added benefit of fine tuning your throw on the nosewheel without affecting any programing in your radio.

[jonathanmanopla]

if you can do the mix you can use Anothe Y between the rudder servos and the nose servo that gonna work fine i do than on a plane dont have any problem

[starzak]

Problem Solved !

Adios.

... zak