glitch - solved

[ki5pb]

several months ago i flew a chipmonk and had a bad glitch. severe on high rates. i posted here for help on the problem and toro answered with several suggestions i flew it yesterday and the problem seems to be solved. i went to radio shack and purchased an rf choke. i installed it at the receiver. it clamps around the wiring comming and going from the receiver. it stops all stray rf living on the wiring from entering the receiver. i could not find any ferritt beads localy. i shifted all the servo wiring to one side of the plane and all the power wiring to the other side. and i think the big thing was, put a new chrystal in the receiver. at last months club meeting some one hadd the same problem as i did, changed the chrystal and fixed it. i took off yesterday, pulled out and she flew almost like a new plane. at altitude and on high rate still had a small quiver but might not have been noticed if i wasnt really looking for something to happen. thank you very much toro for the help and the suggestions.
jack