I guess the title says it all!!!!!
Foamy Hardware
Posted 11-07-2007 at 09:37 PM by Matchless
Well, I finally got my hands on the foamy hardware I designed. I drew this hardware up for smaller 3d oriented birds that use the Dymond 4.7 gram servos. Included in the set are landing gear braces, pushrod braces, firewall and various horns. They have shorter hole spacings to work with the Dymonds which have correspondingly shorter arms.
The smallest horns are for verrrry small projects, but I'll probably not cut them on sets of the hardware.
The cutter was very generous and sent me 3 sets to test, but the grain is not oriented right on the sheets, so the horns are a bit more flexible than I'd like....
I also picked up a case of depron today at the LHS so I can build something to practice freestyle with...
The smallest horns are for verrrry small projects, but I'll probably not cut them on sets of the hardware.
The cutter was very generous and sent me 3 sets to test, but the grain is not oriented right on the sheets, so the horns are a bit more flexible than I'd like....
I also picked up a case of depron today at the LHS so I can build something to practice freestyle with...
Total Comments 1
Comments
 |  where and who cutts your wood? |
  |
Total Trackbacks 0
Trackbacks
Recent Blog Entries by Matchless
- Putting away the foamies for a while.... (04-21-2008)
- Some Foamy Painting Goodness! (03-15-2008)
- New Website (03-01-2008)
- 2 New Birds Out (02-22-2008)
- Digging out and moving on....... (02-12-2008)
