I had just built a new EDGE 540T from CMP airplanes with a DA50 and put 5 5min, flights on it. all was fine then i started to see the 3D abilitys.About 3mins into the 6th flight i started simple in and out snap rolls. The 7th snap is when the wing broke off about 2 1/2in, from the fuselage. We know what happen next. I found there was almost no glue on the ribs in the wing. But lesson learned.

ppdloc

I posted my question under another forum but I figured I should post it under my own blog. So here it is:
I bought my spe 43 new last year and had it started once after 30 minutes of flipping. AFter the first start, I shut it down to see if it will start up again. Well, it didn't and i just gave up and bought a DA50. But now I need this engine (DA 50 is way too big for this 72" plane) and would like to figure it out. I have a feeling its the ignition because the one time I had it started, I was able to tweak the carb and it ran good for 5 minutes or so. Anyrate, I am getting a weak spark...

bigmike3412

Has any one tried a larger funtana( 90,100x or 125 with a zenoah g20?. If so how was the power and how well did it fly?

Jason X

...

naldin

Please, Please,, what has happened to the FG-TV live feeds this summer? Sure do miss the excitement.

Johnb96041