FlyingGiants Exclusive! Introducing The Futaba 12FG, Modules & More!

[Judge]

	Quote: Originally Posted by RTK
	Judge--Do you know if Futaba will come out with a 14mz that will be 2.4 (with out the module)?

I have not heard anything about the future plans for the 14MZ.

[LarryMagoo]

I know this hads been asked upteen time but prices for the 2.4 GHz stuff????

Especially the T12FGA??? And maybe a better date than "early Summer"

Thanks,

Magoo

[BRUTUS]

Tower is listing a Module/3-channel Rx combo for $200....

http://www2.towerhobbies.com/cgi-bin...?&I=LXLZP3&P=0

I was looking for at least a 7-channel combo myself plus some extra Rx's.

[torquen]

Brutus, that is the car Module and receiver. The aircraft stuff should be up soon with prices.
Garrett

[Julez]

	Quote: Originally Posted by Judge
	This is the exact opposite of what I have been told here in the US. There is NO difference between the systems RF-wise, they are ALL the FASST system and there is no reason that the 6-channel should not work. However, I will ask the question again and get back when I get more info.

Thank you for trying to investigate further in this matter.

What puzzles me, is, although the are all the FASST system, one has to select a 7 or 8-channel mode on the 8ch module, yet, one can operate the 14ch rx, even according to the german importer.

Cheers,

Julez

[BRUTUS]

	Quote: Originally Posted by torquen
	Brutus, that is the car Module and receiver. The aircraft stuff should be up soon with prices. Garrett

Yeah, I wondered about that when I posted; how long has it been out?

[Windecker]

I will ask and report back, but I think what they mean is you can use the rx's but if your tx is a 6 channel, your not going to get more than that even though your using the 14 channel rx.

I will get back to you on the 6 channel rx question asked earlier.
Will B.

	Quote: Originally Posted by Julez
	Thank you for trying to investigate further in this matter. What puzzles me, is, although the are all the FASST system, one has to select a 7 or 8-channel mode on the 8ch module, yet, one can operate the 14ch rx, even according to the german importer. Cheers, Julez

[Radioactive]

Will, i believe this is what we learned in Toledo. The TX, would limit the availbale channels. Great to see you and Ms. M... man she had the booth going baby!

[Julez]

	Quote: Originally Posted by Windecker
	I will ask and report back, but I think what they mean is you can use the rx's but if your tx is a 6 channel, your not going to get more than that even though your using the 14 channel rx. I will get back to you on the 6 channel rx question asked earlier. Will B.

Hi!

Just to clarify, I asked the support:

"Is it possible to operate the reciever R606FS with the TM-8 module?"

The answer was:

"No, this will not be possible. For this module, the recievers R607FS, R608FS and R6014FS are intended."


Now the question is: Does the channel number select button adjust the module to the number of incoming PPM channels, or does it determine the number of outgoing channels? If it was the latter, which position would it have to be in if the R6014FS was selected? Why would the 14ch RX work with a lower number of channels selected on the module, but, when using the 8ch RX, it would not work when 7 channels are selected on the module? In both cases, the channel number of the module was lower than the channel number on the RX.

As this scenario does not make too much sense, I guess the module has to be adjusted according to the incoming number of PPM channels.

Are there any Futaba TXes using the normal module size, that put out a different number than 7 or 8 channels in PPM?

Cheers,

Julez

[paffy]

	Quote: Originally Posted by Julez
	Hi! Just to clarify, I asked the support: "Is it possible to operate the reciever R606FS with the TM-8 module?" The answer was: "No, this will not be possible. For this module, the recievers R607FS, R608FS and R6014FS are intended." Now the question is: Does the channel number select button adjust the module to the number of incoming PPM channels, or does it determine the number of outgoing channels? If it was the latter, which position would it have to be in if the R6014FS was selected? Why would the 14ch RX work with a lower number of channels selected on the module, but, when using the 8ch RX, it would not work when 7 channels are selected on the module? In both cases, the channel number of the module was lower than the channel number on the RX. As this scenario does not make too much sense, I guess the module has to be adjusted according to the incoming number of PPM channels. Are there any Futaba TXes using the normal module size, that put out a different number than 7 or 8 channels in PPM? Cheers, Julez

You are too smart to analyze and make sense from marketing blurbs and "cheat sheet" techsupport answers .

Don't bother - wait for the actual product to show up, spend 2 minutes with it and you'll get all your answers. Otherwise, you'll just go crazy.

P.

[Hammbone]

There's a button you have to adjust on the module every time you fly a RX with a different # of channels???????

[Julez]

	Quote: Originally Posted by Hammbone
	There's a button you have to adjust on the module every time you fly a RX with a different # of channels???????

I hope not.