Please help with the unlimited Imac sequence

[3D Trev]

Hey Guys can anyone please help me I am looking for the Narative for the 2006 Unlimited Imac sequence we still fly this 2006 sequence at our nats in 2 weeks and then change to the 2007 sequence. But does anyone have the Naritive for the 2006

Please help

Trev

[Wayne]

Here ya go.
Written descriptions and videos.

2007 IMAC sequences (written descriptions)

2007 IMAC Sequence Recordings.

[Dangerous Dan]

Wayne I think he was needing the 2006 Unlimited Narritive

[Wayne]

Oops..

I just re-read your post. Your looking for '06.


Here are all of the '06 descriptions.



Basic:
1- One roll from upright to upright.
2- Pull to Vertical, pull half inside loop, 1/2 roll on the vertical downline, pull to upright exit.
3- Pull to 45, 1/2 roll, pull 5/8 inside loop, exit upright.
4- Pull inside loop.
5- Pull vertical, stall turn, vertical downline, pull to upright exit.
6- Pull 45 upline, 1/2 roll, pull to vertical downline, pull to upright exit.
7- Pull vertical, pull 3/4 inside loop, exit upright
8- Pull 5/8 inside loop to a 45 downline, 1/2 roll, pull to upright exit.
9- Pull 1/2 inside loop, 1/2 roll, exit upright.
10- 1-1/2 positive spin, pull to exit upright.


Sportsman:
1- Pull vertical, 2 points of an 8 point roll, Stall turn, vertical downline with a 3/4 roll, pull to upright exit.
2- straight line, 1/2 roll to inverted, push 5/8 outside loop to a 45 downline, 1 positive snap, pull to upright exit.
3- Pull 1/2 inside loop, 1/2 roll, exit upright.
4- 1-1/4 positive spin, exit upright cross box.
5- Pull to vertical. 2 points of a 4 point roll, push 1/2 outside loop, vertical downline with 1/4 roll, pull to upright exit.
6- Pull to vertical upline, One roll, Pull to inverted exit.
7- From inverted, 2 point roll back to inverted, pull 1/2 inside loop, exit upright.
8- Pull 1 inside loop with one full roll at the top, exit upright
9- Pull 135 degrees to a 45 upline, 2 points of a 4 point roll, push to upright exit.
10- From upright, 1/2 roll to inverted, pull 3/4 inside loop to a vertical upline, 3/4 roll, push to upright cross box exit.


Intermediate:
1- Pull 7/8 inside loop to a 45 degree downline, 1/2 roll, push to inverted exit.
2- Push to a 45 degree upline, 2 point roll, push 5/8 outside loop to a vertical downline, one positive snap, pull to upright exit.
3- Pull vertical upline, pull to a 45 degree downline, 4 points of an 8 point roll, pull to upright exit.
4- Pull vertical upline, 1-1/2 rolls, Stall turn, vertical downline, 2 points of a 4 point roll, pull to upright exit.
5- Pull to 45 upline, 1 roll, push to a vertical downline, 1/4 roll, opposite direction 3/4 roll, pull to upright exit.
6- Pull to vertical upline, 3/4 roll, pull 1/2 inside loop (X-box), Vertical downline with 1-1/4 rolls, pull to upright exit.
7- Pull to 45 upline, 1 positive snap, push 3/4 outside loop to a 45 degree upline, 4 point roll, pull to inverted exit.
8- Pull to a 45 degree downline, one negative snap, pull 1/2 inside loop to a 45 degree upline, 1 roll, push to upright exit.
9- 1-1/4 positive spin, exit cross box upright.
10- 1 roll to the inside of a 90 degree heading change, exit upright.


Advanced:
1- Pull to vertical, 3 points of a 4 point roll, stall turn, vertical downline with a 2 point roll, push to inverted cross box exit.
2- From inverted, 270 degree rolling circle with 3 rolls to the inside, exit inverted.
3- Push to a 45 upline, 1 roll, push to upright exit.
4- Push 1/2 outside loop, 1/2 roll, opposite direction 1 positive snap, pull 1/2 inside loop, exit inverted.
5- Pull to a vertical downline, 3/4 roll, opposite direction 3/4 negative snap, Pull to a 45 degree upline, 3 points of a 2 point roll, pull to inverted exit.
6- 1-1/2 negative spin, push to inverted exit.
7- Push to vertical upline, 1/4 roll, opposite direction 1 positive snap, Pull 1/2 inside loop (X-Box), vertical downline, 1-1/4 negative snaps, pull to upright exit.
8- Pull to 45 upline, 1 positive snap, opposite direction 1/2 roll, Pull 3/4 inside loop to a 45 upline, 1/4 roll, opposite direction 3/4 roll, pull to inverted exit.
9- Pull to a 45 downline, 1-1/2 negative snaps, pull 1/2 inside loop to a 45 upline, 1-1/2 rolls, push to upright exit.
10- 1-1/2 positive snaps, pull 1/2 inside loop, 8 point roll, exit upright.


Unlimited:
1- Pull 135 degrees to a 45 upline, 2 points of a 4 point roll, opposite direction 2 point roll, push to a vertical downline, 1 negative snap, push to inverted exit.
2- Push to a 45 upline, 3/4 negative snap, opposite direction 3 points of a 4 point roll, pull 3/4 inside loop to a 45 upline, 1-1/2 rolls, pull to inverted exit.
3- 1 roll, pull 1/2 inside loop, 8 point roll, exit upright.
4- Pull vertical, 1-1/2 negative snaps, stall turn, vertical downline with 1 positive snap, opposite direction 1/2 roll, pull to upright exit.
5- Pull vertical upline, 3 points of a 2 point roll, pull 3/4 inside loop with 1 positive snap on top, 2 points of a 4 point roll, exit inverted.
6- 1-1/4 negative spin, vertical downline, 1/2 inside loop (X-Box), vertical upline, 6 points of an 8 point roll, push to upright exit.
7- Push to vertical downline, 2 point roll, pull to a 45 dgeree upline, 1 roll, push to a vertical downline, 2 negative snaps, push to inverted exit.
8- From inverted, 180 degree heading change with 1 roll to the inside, 180 degree heading change with 1 roll to the outside, exit inverted.
9- Push to 45 upline, 1 roll, opposite direction 1/2 roll, push 5/8 outside loop,1 negative snap, exit inverted.
10- 3 points of a 4 point roll, opposite direction 1-3/4 positive snap, exit inverted.

[3D Trev]

Thanks Wayne

You are the Main O

cheers Trev