extra gone bipe

[rotccapt]

hi all i have a great planes 40 size extra that i built from a kit. it had a bit of an accident about 6 months ago and one side of the wing was damaged so i had a thought lets make it into a bi plane. so i started doing some drawing and i came up with a 49" wing span with a 3" sweep and 8" tip and root cords also i will have a 2" positive stagger. the fuse from back of spinner to tail is 47" so all in all it will be an almost square plane. i am planning on using symmetrical airfoils and will be powering it with a saito 82 what do you think here is a pic of my idea

[smokin]

[MODE 1]

Im building a bipe right now but its a scratch build from 3 views ......yours should be fine so long as you calc the CG correctly.
I seem to recall Tom from Wildhare making an Edge 540 bipe out of parts from his 80+ models.......lol wasnt exactly a babe magnet

[MX304]

I think it will look pretty cool. Most of the ultimate bipes look like extras anyway.

[rotccapt]

well i got a bit more done on the drawing still lots to do

[Greyhoundman]

	Quote: Originally Posted by MODE 1
	I seem to recall Tom from Wildhare making an Edge 540 bipe out of parts from his 80+ models.......lol wasnt exactly a babe magnet

I remember that from a few years ago.....THE DOUBLE EDGE

[DEVZAK9]

Sounds like a cool idea im gonna keep an eye on this thread

[rotccapt]

well here is what i have so far i am still working on how to do my inter-plane struts. i had a though that since my wings will only be 49" long. if i build both wings strong enough do the i struts need to be functional? my thinking was that i found on the great planes 40 size ultimate the i struts fit into slots in the wing but are not bolted in so they are just there for looks and not structure. do you think this would work on my project? here is a pic of the thought and what i have so far

[LawnJockey]

	Quote: Originally Posted by MODE 1
	Im building a bipe right now but its a scratch build from 3 views ......yours should be fine so long as you calc the CG correctly. I seem to recall Tom from Wildhare making an Edge 540 bipe out of parts from his 80+ models.......lol wasnt exactly a babe magnet

HA HA. I bought that plane from Tom. That thing was FUGLY. But it drew attention to it's self. Some guy in WA bought it off me.

LJ

[MODE 1]

	Quote: Originally Posted by rotccapt
	well here is what i have so far i am still working on how to do my inter-plane struts. i had a though that since my wings will only be 49" long. if i build both wings strong enough do the i struts need to be functional? my thinking was that i found on the great planes 40 size ultimate the i struts fit into slots in the wing but are not bolted in so they are just there for looks and not structure. do you think this would work on my project? here is a pic of the thought and what i have so far

Despite the small size of the model you'll still need to secure the struts somehow or they will work themselves loose over time. The rocking effect of the top wing and its impaction onto the lower wing as you roll will gradually work its magic.

Why not a simple plywood tab on the inner wing surfaces. Only one per panel side. This can be drilled and blind nut fitted so the struts can be screwed to the tabs securely and in quick time.

[rotccapt]

i thought of that too. my other thought would be to have a knurl screw embedded into the strut and a wood pin that would screw into the bottom of the wing but the tab would be easier to design i will try that thanks for the idea

[Craigsc5]

OK, I will follow along with this idea, I would assume we can call this a semi scratch build project. Will you have a camera available to provide a picture now and then? What is the condition of the fuselage and tail, are you thinking about landing gear location?