Check this out 35% hanger9 extra 260

[kickenchiken]

Hello,
Well I just bought a hanger 9 35% extra 260 and I was wondering if the Da-85 would be enough power for the plane also if so, If I put 1 can muffler on it would that affect the way it flys since there is one can on one side of the plane? thanks

[crackedup]

Did you weight it yet? I would think it would be fine but get your weight first. Then make up your mind what motor to run 85cc -110cc
Good luck with your new plane. Send pix would like to see
flameou127@sbcglobal.net

[thewrap]

I've heard that the 85 puts out close to the same output as the DA 100 only a little smoother. I'm not positive on that. But if was my plane then I would put a 3W 106 on the nose. Same weight or close to the 100 only more power. Just my .02

[Mark Davis]

I fly the H9 260 with a DA-85 and it's an excellent combo... There are several threads on FG related to this airframe with different powerplants... Just use the search function...

Merry Christmas...

[kickenchiken]

Thanks for your help to the person with the 260 with the da-85 can you do torq rolls and hovering and all the imac just fine and if so can you send me all of the specs and how you set up your plane thanks again.

[Vic3D]

	Quote: Originally Posted by thewrap
	But if was my plane then I would put a 3W 106 on the nose. Same weight or close to the 100 only more power. Just my .02

I agee with thewrap (finally). But yes, the DA-85 is probably enough for good 3D and some nice IMAC. I would use a tuned pipe, like a Greve pipe or KS-1090. You should mount the motor inverted with a wraparound header and that needs the pipe or can mounted in the middle. Not off to a side. Good luck!