New Fancy Foam MX2 !!!

[pitviper51]

Hi Folks,
Since no one posted this yet and since I scooped one up last night right as it became available I figure why not start a thread for it.

http://stores.homestead.com/fancyfoa...h-2/Detail.bok

Video
http://flightpass.higherplaneproduct...udio-H264s.mov

This is gonna be a fun plane for sure, and it looks different to the old yak55 ( big plus). On top of that RJ Gritter designed it, and Seth Arnold won at ETOC with it, so it has to be good. Mine is now on the way and I will post photos and video once I have it flying. Let this be the place to post about it. Thanks again Seth and RJ for the help deciding what gear to get for it. you guys are great keep up the great work and flying.

Mike

[3dAndrew]

ooooooh! Thanks for the post! I'll order one up!

[pitviper51]

video added^ same video on the FF site but adding content here.
mike

[3D-Seth]

Its a great airplane for sure! I think all of you guys will like them!

Thanks for the kind words Mike, glad I could help! Airplane was just released yesterday, just in time for Indoor season! Woohoo! JR Fest is right around the corner, who will have them there? I know I will!

Feel free to ask any questions you guys may have, RJ, Jamie, and I would be glad to help!

YouTube - Seth Arnold ETOC 2009 CHAMP!!!!!

Seth

[hpapilot]

Thanks for the thread Mike!

Mike at Fancy Foam is cutting a whole ton of MX2 kits as we speak, but some are still in stock on the website.

Any questions anybody, just ask!

RJ

[pitviper51]

Seth i cant tell how many times I watched that video haha. the first use of reverse, makes you stop and say WHAT ???!?!?!?!? I may have to built the Vari model,, is there a US distributer for the mama unit?
mike

[askforplanes]

Here is what RJ said his setup is,

"Hey, no problem, here's my setup for VPP...

Hacker A20-34S
Castle Phoenix 10 ESC
Futaba S3154 ailerons
Futaba S3114 elev/rudder
2S 325mah Lipo
Mamo-models VPP system

Lemme know if you need anything else,

RJ"

And dealers

"Sure...

MX2 kit - www.fancyfoam.com
Hacker motor, batteries- www.aero-model.com
Castle ESC, Futaba Servos - www.towerhobbies.com
Mamo VPP system - www.airlandseahobby.com

Hope this helps.

RJ"


Again, thanks RJ for the help!
JP

[hpapilot]

Hahaha thanks JP, I was actually on my way to this thread to post that, but that works too.

Here's my setup for my normal setup without VPP:

Hacker A10-9L
Hacker X-5 ESC
Futaba S3114's all around
Futaba R6004FF Receiver
GWS 8x4.3 Slow-fly prop
2S 300mah 25C battery

RJ

[louu]

i ordered one last night, cant wait to crash, umm i mean, fly it. should be pretty exciting. theres not many full scale planes that i really like the paint job on but ive always been crazy about this one.
fancy foam was out of motors and props so i ordered the motor today from 3dx hobbies http://stores.3dxhobbies.com/-strse-...AHacker+Motors they have em for $38 but they dident have the props either. my lhs cant get gws props but i did have them order me up some jr185's yestadey for the rud and elev, i wasent shure if i shoulda got 188's but the specks in the book were the same so i cheaped out. i have a jr285 imm gluen in the middle. where can i get some props???
i was hanging out with dave lockheart the other day and was getting some tips on building light. he was also saying on some planes he likes to use that of UHU POR Glue because its flexible. what do you guys think about using that stuff on this plane? i do have a brand new tube of that ultimate rc foam glue, i guess its kind of the same thing, flexible and all. i usually use mercuary ca.

[hpapilot]

I always use BSI Odorless Thin CA on my planes. Haven't tried the UHU stuff but the BSI Thin works great for me.

As far as props, I usually get them through my LHS, but Tower Hobbies does have them.

Good luck, let us know how it goes!

RJ

[3D-Seth]

	Quote: Originally Posted by louu
	i ordered one last night, cant wait to crash, umm i mean, fly it. should be pretty exciting. theres not many full scale planes that i really like the paint job on but ive always been crazy about this one. fancy foam was out of motors and props so i ordered the motor today from 3dx hobbies http://stores.3dxhobbies.com/-strse-...AHacker+Motors they have em for $38 but they dident have the props either. my lhs cant get gws props but i did have them order me up some jr185's yestadey for the rud and elev, i wasent shure if i shoulda got 188's but the specks in the book were the same so i cheaped out. i have a jr285 imm gluen in the middle. where can i get some props??? i was hanging out with dave lockheart the other day and was getting some tips on building light. he was also saying on some planes he likes to use that of UHU POR Glue because its flexible. what do you guys think about using that stuff on this plane? i do have a brand new tube of that ultimate rc foam glue, i guess its kind of the same thing, flexible and all. i usually use mercuary ca.

I use Thin BSI Foam Safe.

I hate working with the UHU stuff.

[3D-Seth]

	Quote: Originally Posted by pitviper51
	Seth i cant tell how many times I watched that video haha. the first use of reverse, makes you stop and say WHAT ???!?!?!?!? I may have to built the Vari model,, is there a US distributer for the mama unit? mike

LOL, that was the idea when I came up with it

US Distributor: http://www.airlandseahobby.com/shop_...m?subcat_ID=23

Seth