i need some help on a h9 extra

[fly boy]

hey guys
well i hope to get a h9 extra the 33% one with a 3w 75 or 80 and a
JR xp9303 TX this winter.
i need a list of all the electronics i need and batts every thing i got this so fare

1.2x 12'' ext
2.4x 18'' ext
3.5x 24'' ext

I'm hoping to get this this winter if i don't get a eflight 60 for a giant foamy

[Cracky]

Have you decided if you are going to do single or dual aileron and rudder servos?

[SleepyC]

I just had one briefly.... it was glorious for 1 - 20 sec flight!!
(<------- see avitar)
You will need :
8 - high torque high speed servos (I used Hitec 5945's.)
You will need at least 1- 4800 lit ion pack for the receiver with a reg :
and 1 - 2400 lit ion pack with reg for the ignition.
Or replace both lit ions with NIMH packs.

I used a power expander, but thats optional.

If you don't use Hitec programmable servos, you will need a few match boxes for the wing servos....

And with a plane of this size, I would highly suggest a good kill switch/ign kill.
Smart fly makes a great one.

This plane looks killer when finished...
I miss mine badly.

[Cracky]

Yah, what Sleepy said......


good flying plane...

here is a pic of mine when I first got it.

[TeamFlatout]

I dont think matchboxes are really necessary all the time. I have the Chapman cap 580 and I have 2 8411's on each aeleron and 2 on the rudder. They are matched up perfect and not a one is fighting each other. Also on one of our 40%er's we have 4 8411's on the rudder without a matchbox. Actually we had servos strip with the matchbox on this particular plane, ripped out the matchbox and matched them up regularly and havent had a problem since. This has been 2 years ago.

[matus777]

	Quote: Originally Posted by TeamFlatout
	I dont think matchboxes are really necessary all the time. I have the Chapman cap 580 and I have 2 8411's on each aeleron and 2 on the rudder. They are matched up perfect and not a one is fighting each other. Also on one of our 40%er's we have 4 8411's on the rudder without a matchbox. Actually we had servos strip with the matchbox on this particular plane, ripped out the matchbox and matched them up regularly and havent had a problem since. This has been 2 years ago.

Ok so how did you do all that....care to share?

[GremlinX]

Do not let Jeeum Maiden it.. he is hexed out ......... He titanic'd poor Sleepy's..

[fly boy]

so would i just use y harness to hook all the dueled servos up or with a 9 ch Rx can i just program it in the TX and also how many Rx do i need.????
this will be my first gasser.wick i gotta work super hard for this summer.

o ya and i see 8411 are the mane price as 8611 wich sould i get.

[fly boy]

	Quote: Originally Posted by SleepyC
	I just had one briefly.... it was glorious for 1 - 20 sec flight!! (<------- see avitar) You will need : 8 - high torque high speed servos (I used Hitec 5945's.) You will need at least 1- 4800 lit ion pack for the receiver with a reg : and 1 - 2400 lit ion pack with reg for the ignition. Or replace both lit ions with NIMH packs. I used a power expander, but thats optional. If you don't use Hitec programmable servos, you will need a few match boxes for the wing servos.... And with a plane of this size, I would highly suggest a good kill switch/ign kill. Smart fly makes a great one. This plane looks killer when finished... I miss mine badly.

so sorry about your lost pcm right.

[Cracky]

Might as well get the 8611's if you have to buy new......but sometimes you can find smokin deals on 8411's which would work too.

[youngflyer]

sleepy do you still have the plane and is it fixable?

[HjorturG]

No offence, but weren't you complaining earlier about having no place to fly your glow planes and now you're buying a 33%???