The Digital XQ-S4230D have done a good work on my plane.
Weight:56g ±0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.15sec/60º at (9.6V)
0.13sec/60º at (12V)
Torque: (340 oz-in)24.5kg.cm.at(9.6V)
(428 oz-in)30.8kg.cm.at(12V)
Weight:56g ±0.2(1.46oz);
Gear type:Titanium Gear;
Speed:0.15sec/60º at (9.6V)
0.13sec/60º at (12V)
Torque: (340 oz-in)24.5kg.cm.at(9.6V)
(428 oz-in)30.8kg.cm.at(12V)
Comments (14)
Add Comment
Another big day for me!
I installed two pieces brushless servo for my 1/8 buggy(all newly bought from RedwingRC),one as the steering (XQ-S4618D) and the other XQ-S4615D as the throttle and brake.
I had already tested the #4618 to steer my 1/8th nitro buggy in day before that.so I installed the XQ-S4615D in my throttle position for this club event this time.Once again I carefully limit my braking action for the XQ-S4615D,and also adjust my servo-saver so that it would not require too much torque to actuate.
I got to make sure everything goes right before the big race(actually it's just a club routine)
While racing in a close third place to the leader in the first few minutes,then straightly go forward to the second.......and finally run up to the first,ending my weekend.
Jesus,it quite amazing.Those XQ Power servos are really good.they are best alternative servos I've tired
beside those "big names" like Futaba and JR..............
I installed two pieces brushless servo for my 1/8 buggy(all newly bought from RedwingRC),one as the steering (XQ-S4618D) and the other XQ-S4615D as the throttle and brake.
I had already tested the #4618 to steer my 1/8th nitro buggy in day before that.so I installed the XQ-S4615D in my throttle position for this club event this time.Once again I carefully limit my braking action for the XQ-S4615D,and also adjust my servo-saver so that it would not require too much torque to actuate.
I got to make sure everything goes right before the big race(actually it's just a club routine)
While racing in a close third place to the leader in the first few minutes,then straightly go forward to the second.......and finally run up to the first,ending my weekend.
Jesus,it quite amazing.Those XQ Power servos are really good.they are best alternative servos I've tired
beside those "big names" like Futaba and JR..............
Sticky:
What the hell is it?
Days ago,my friend bought two new high torque digital servo for his 50cc aero.
Those servos look really good.however during first connected to the recieiver ( futaba 2.4G 8ch model) for neutral position check,
two servos are automatically moved to left and right (swinging) to several times and after stopped moving, we tried to apply left and right direction signal to servos then two servos are moving left and right again and stopped after 3 times swings.
The result is that we had planned to enjoy a nice Sunday afternoon flying.It turned out to be a skeleton at the feast.
I've told him be cautious when choosing servos
Does anybody know what the hell is it?
Could it be any other problems except the servo parts?
Those servos look really good.however during first connected to the recieiver ( futaba 2.4G 8ch model) for neutral position check,
two servos are automatically moved to left and right (swinging) to several times and after stopped moving, we tried to apply left and right direction signal to servos then two servos are moving left and right again and stopped after 3 times swings.
The result is that we had planned to enjoy a nice Sunday afternoon flying.It turned out to be a skeleton at the feast.
I've told him be cautious when choosing servos
Does anybody know what the hell is it?
Could it be any other problems except the servo parts?
Those days when I am looking for superfast high torque digital servo for my 600 Heli,guess what I found????
It's unbelievable.Servo in rose-red color????I have never seen any servo in such colour before.
It's unbelievable.Servo in rose-red color????I have never seen any servo in such colour before.
