Like I replied to you in the other thread, I've set it up and it works fine. That was with a 2 x 2400 lithiums, Smartfly super-reg, and Smartfly Power Expander.
|
Quote: |
|
|
|
|
To bind the unit you have to use there switch into the battery port on the rx. So I disconnected the rx from the Power Expander and plugged in the JR switch like the manual shows. |
|
|
|
|
That's not entirely true, it'll bind with any 3 wire switch, or with the bind plug plugged into the battery port on the receiver. I didn't have the switch handy on my second one (since I had already installed it in another plane), so I plugged a battery into one of the servo ports and the bind plug into the battery port. Worked great.