3D Hobby Shop is pleased to announce there all new
47" Extra 300 SHP (Super High Performance) 3D airplane. This Extra is a 3D Hobby Shop original design that was developed by Scott Stoops (sukhoi26mx) in cooperation with 3D Hobby Shop and their partner factory in China. The sole purpose of the Extra 300 SHP is rock solid 3D flight to the MAX!!
47" Extra 300 SHP Specs:
Wingspan: 47.25"
Wing Area: 464 sq. in.
Length: 44"
AUW: 37-41 oz.
Wing loading: 11.4oz./sq.ft.-12.7oz./sq.ft.
Recommended Equipment:
Motor: Torque 2818T/900
ESC: Torque Airboss 45A Elite
Prop: APC 13 x 6.5E
Battery: TPX 3s 2070 25C
Servos: (4) HS-65HB
The Extra 300 SHP will come with all the same high quality hardware that the current
3DHS Yak-54 and
3DHS Katana models utilize. However in addition to that the Extra 300 SHP will also come with convienent changes.
- Hinges come pre-installed in all the surfaces.
- Hinge slot in the rear of the fuse now comes pre-cut.
- All Extra 300 SHP's will come with 52mm heavy duty wheels (very solid).
- Scale looking Extra 300 CF landing gear (no straight CF legs on this plane).
- Pull strings in each wing half for aileron wiring.
- Firewall hole is now a perfect match for the Torque 2818T/900 motor.
- 3mm motor mounting harware included.
All 3D Hobby Shop airplanes are made of light weight laser-cut balsa and light plywood. The Extra will come with a pre-cut fiberglass cowl and wheel pants, uniquely effective canopy hatch attachment, and a two piece removeable wing which rests on a carbon fiber wing tube.
3D Hobby Shop will be taking pre-orders on there new Extra 300 SHP within 24hrs. These planes will be available in March and will be offered at a price of $149.99 for the Extra 300 SHP ARF. There will also be a power-combo being offered which will include the airplane, Torque 2818T/900 and the Airboss Elite 45A speed controller for $269.99.