FlyingGiants - View Single Post

73drvr · 02-15-2006, 09:25 PM

Maybe this will help....

You may be able to epoxy four hardwood blocks to the edge of the firewall: two on each side of the firewall as close to the edge as posssible. Then put the cowl in place and drill through the cowl and hardwood blocks at the same time. Put small blind nuts on the backside (or inside if you will) of the wood blocks and Voila!!!

Do some measuring and/or marking before you drill so you dont miss the blocks.

Hope this helps. If I am not really clear here let me know.

02-15-2006, 09:25 PM	#3
73drvr Gettin' Lower! Join Date: Jan 2006 Location: Trumbull, CT Posts: 53	Re: GP 33% Extra 330L Cowl mounting ideas Maybe this will help.... You may be able to epoxy four hardwood blocks to the edge of the firewall: two on each side of the firewall as close to the edge as posssible. Then put the cowl in place and drill through the cowl and hardwood blocks at the same time. Put small blind nuts on the backside (or inside if you will) of the wood blocks and Voila!!! Do some measuring and/or marking before you drill so you dont miss the blocks. Hope this helps. If I am not really clear here let me know. Last edited by 73drvr; 02-15-2006 at 09:30 PM.