FlyingGiants - View Single Post

Shawn Berkheimer · 03-29-2007, 10:22 AM

Sheeting the foam with 1/16 AAA is a good start, I did extensive fuse mods to get weight out. I used the ABS parts as molds and did my own CF reinforced fiberglass parts. At the time CF gear and tubes were not available so with the mods and more CF parts along with the DA you may get down to 20 lbs.

Shawn

03-29-2007, 10:22 AM	#4
Shawn Berkheimer Put some Bling on that thing Join Date: Jan 2006 Location: San Jose CA Posts: 642	Re: 35% Lanier Giles 202 Sheeting the foam with 1/16 AAA is a good start, I did extensive fuse mods to get weight out. I used the ABS parts as molds and did my own CF reinforced fiberglass parts. At the time CF gear and tubes were not available so with the mods and more CF parts along with the DA you may get down to 20 lbs. Shawn