|
|
|
|
|
|
|
hi, its my first gas plane, and i need help from all of you. i just want to know what i need to have a good setup... here's what i have already
4x 5985
1x 5955
receiver
im wondring what kind of battery i need ( lipo or nimh, did i need regulator, what kind of switch etc..
thx alot guys
and you want to show pictures of your instalation I'll apreciate |
|
|
|
|
Hi RickyD,
I am sure the instructions suggest a servo with a minimum of 180 oz inches per surface, so it sounds like you should be fine. I set ours up with lithium ion batteries and regulators on the ignition and servos. I used a fromeco regulated reliaswitch for the rx and a smartfly ignition regulator for the DA. There are some pictures of my install in this thread.
http://www.flyinggiants.com/forums/f...260-squee.html
It is a good flying plane. I think you will like it.