FlyingGiants - View Single Post

Flyinrazrback · 07-20-2007, 11:04 PM

Its a 3W 170 with the 3W cans, which are 3.35" x 14" long. There is no way to fit them in the plane without the front of the can sticking out of the bottom portion of the motor dome. The MTW 110K cans are quite a bit shorter and is what is in the manual for a DA 150, but these are too small for the 3W. I was going to use stock mufflers on the 3W, but the cowling is butchered a ton to fit them in and looks bad IMO.

07-20-2007, 11:04 PM	#3
Flyinrazrback Smoking a Blunt with Yoda Join Date: Jan 2006 Location: Ft. Smith, AR Posts: 2,648	Re: Comp arf build question Its a 3W 170 with the 3W cans, which are 3.35" x 14" long. There is no way to fit them in the plane without the front of the can sticking out of the bottom portion of the motor dome. The MTW 110K cans are quite a bit shorter and is what is in the manual for a DA 150, but these are too small for the 3W. I was going to use stock mufflers on the 3W, but the cowling is butchered a ton to fit them in and looks bad IMO. __________________ Drink the Koolaid, Yoda will not