FlyingGiants - View Single Post

north40 · 08-23-2007, 02:24 AM

Thanks Jack for the reply.

I rigged the switch harness to pushed by a servo and that works OK. I wasn't pleased with how much oomph it took to push & pull the switch.

I went to the hardware store and bought a 69 cent light switch and took all the metal parts off. I drilled a hole in the toggle for the push rod & installed the light switch. This light switch is a cream puff to push/pull back & forth by the servo.

This might actually work.

08-23-2007, 02:24 AM	#3
north40 Flyin' Around Join Date: Aug 2007 Location: Mora, MN Posts: 3	Re: Kill Switch for Gas CHI ignition Thanks Jack for the reply. I rigged the switch harness to pushed by a servo and that works OK. I wasn't pleased with how much oomph it took to push & pull the switch. I went to the hardware store and bought a 69 cent light switch and took all the metal parts off. I drilled a hole in the toggle for the push rod & installed the light switch. This light switch is a cream puff to push/pull back & forth by the servo. This might actually work.