FlyingGiants - View Single Post

F3AFlyer7 · 11-15-2007, 05:13 PM

Ok I used the following motor and did some stuff on moto calc and here are the numbers I got for you.

HXT 63-64-A 280Kv 65A Brushless Outrunner (52-30)

Prop: 16x8 APC
Battery: 10s1p 4900mAh
Motor Amps: 59.962
Prop Pitchspeed: 71.2 mph
Static Thrust: 283.2 oz = 17.68 lbs of thrust.
Efficiency: 91.6%
Motor RPM: 9394.61

It looks like you will have more than enough power with this set-up. The only thing I would be careful of is buying cheap chineese motors and batteries. You don't wanna spend all that money and end up with a poor or dead product with no customer support.

Here are some other motor suggestions:

AXI-5330-18

Hacker A60-20s

Himax HC6320-250

Hope that helps!!

11-15-2007, 05:13 PM	#5
F3AFlyer7 L'ectrics r COOOOOL!!! Join Date: Jan 2006 Location: New Baltimore, Michigan Age: 23 Posts: 280	Re: WildHare "Baby Bunny" Conversion Ok I used the following motor and did some stuff on moto calc and here are the numbers I got for you. HXT 63-64-A 280Kv 65A Brushless Outrunner (52-30) Prop: 16x8 APC Battery: 10s1p 4900mAh Motor Amps: 59.962 Prop Pitchspeed: 71.2 mph Static Thrust: 283.2 oz = 17.68 lbs of thrust. Efficiency: 91.6% Motor RPM: 9394.61 It looks like you will have more than enough power with this set-up. The only thing I would be careful of is buying cheap chineese motors and batteries. You don't wanna spend all that money and end up with a poor or dead product with no customer support. Here are some other motor suggestions: AXI-5330-18 Hacker A60-20s Himax HC6320-250 Hope that helps!! __________________ www.castlecreations.com www.fliton.com www.tanicpacks.com Scott Pavlock "The best part about 2.4 is that it's freeing up 72!!"