FlyingGiants - View Single Post

diozxlive · 11-17-2007, 02:17 AM

thank you very much, im a total newbie on this....appreciate all the patience given... how about the balsa/plywood to EPP on the wingspar will uhu or goop be a good glue for this joint or should i use epoxy on this? Also i have to glue 2 stiffiner blocks 1ea on each side of the fuse, the fuse has some paint design on it. do i need to sand the paint off before i lay a coat of UHU or Goop? Thanks much....

11-17-2007, 02:17 AM	#3
diozxlive Flyin' Around Join Date: Nov 2007 Posts: 6	Re: Glue for EPP Super zoom XXL thank you very much, im a total newbie on this....appreciate all the patience given... how about the balsa/plywood to EPP on the wingspar will uhu or goop be a good glue for this joint or should i use epoxy on this? Also i have to glue 2 stiffiner blocks 1ea on each side of the fuse, the fuse has some paint design on it. do i need to sand the paint off before i lay a coat of UHU or Goop? Thanks much.... Last edited by diozxlive; 11-17-2007 at 02:22 AM.