FlyingGiants - View Single Post

Ken-H · 01-10-2008, 09:11 PM

Ok guys, I have some more pictures. First is of the hardware set. Next we have the goodies for the build. I am going to try and use a KS95 canister for the DA-85 with a 50mm drop header. The KS95 is not really the ideal canister for the motor as it's large and the fit will be tight. We'll see how that goes.

For servos, I am using 6 8611's for ailerons, elevators, and a single 8711 for the rudder for both airplanes.

Power is supplied by Fromeco. 3x 2600mAh Lithium Ion batteries. Two for the receiver and one for ign. Also 3x Fromeco regulators and a Wolverine switch. Man I love these switches. I single HD switch for ign.

Ken

01-10-2008, 09:11 PM	#15
Ken-H Center Punch it! Join Date: Mar 2006 Age: 45 Posts: 628	Re: PAU 36% Edge 540 Build Ok guys, I have some more pictures. First is of the hardware set. Next we have the goodies for the build. I am going to try and use a KS95 canister for the DA-85 with a 50mm drop header. The KS95 is not really the ideal canister for the motor as it's large and the fit will be tight. We'll see how that goes. For servos, I am using 6 8611's for ailerons, elevators, and a single 8711 for the rudder for both airplanes. Power is supplied by Fromeco. 3x 2600mAh Lithium Ion batteries. Two for the receiver and one for ign. Also 3x Fromeco regulators and a Wolverine switch. Man I love these switches. I single HD switch for ign. Ken Attached Thumbnails 208.1 KB · Views: 202 201.3 KB · Views: 215 179.5 KB · Views: 202 185.8 KB · Views: 183 __________________ I fly at Flypau.com Powered by Desert Aircraft! Last edited by Ken-H; 01-11-2008 at 12:04 AM.