[Paul Cataldo]

Guys, I just got a new 2.6m Yellow Kiwi Extra 260 ordered from Comp Arf, and I have a few questions.First off, I will be using the upgraded G11 composite control horns from Ian Howard (Australian Comp Arf Rep). I will also be using H9 Ti prolinks and Nelson/Rocket City Ball Links, with SWB servo arms on servo side, and Dubro Snap Locking clevises on the other side. I just need to get a few things straight here.1. What length H9 Ti Prolinks are needed for ailerons? What length for elevators? (Ian Howards FULL kit states 3" for elevator and 2" for ailerons, but I have seen other lengths posted in the forums). What gives guys?2. What size spinner is everyone using? I know 4.5" or 5" probably, but what's best?3. What size tires? 4.5" or 5"??? I know both will work, but what's the consensus, and what fits best with the wheel pants????4. Are 1.5" SWB servo arms the correct size I'll need?5. Will the aftermarket titanium axles work on this plane? I think most are 3/16", but not sure??6. Is it feasible to setup a manual choke, or does the cow just not allow this??? I know the 2.6 Yak can easily allow one's hand to slip inside and flip the choke, but I'm thinking the 2.6 Extra 260 won't allow this.?? Am I correct??? Must I go with a servo for the choke??? Thanks for any help with these 6 questions guys. I would REALLY appreciate the help here, really.