FlyingGiants - View Single Post

gazzajp · 08-30-2008, 12:25 AM

I run a apc 17X6 prop and I reakon it gives me the best all round performance. I get around 8800-9000rpm and it pulls my 11.2lb yak around no worries. Not real sure how much punch out from hover it has as I havn't really tested it properly. Ain't really ready for to much 3D action yet. The thing will pull vertical no probs. The one thing I don't like is the lowest stable idle at 2300-2400rpm. My plane moves around to fast during taxying.

I don't know if I'm way off the mark here, but those of you having running troubles using the NGK plug, just try put the torch one back in and see what happens. For some reason mine ran terrible with the NGK so I currently use the torch.

08-30-2008, 12:25 AM	#517
gazzajp Flyin' Around Join Date: May 2008 Location: Victoria, Australia Posts: 10	Re: CRRC Pro GF26I I run a apc 17X6 prop and I reakon it gives me the best all round performance. I get around 8800-9000rpm and it pulls my 11.2lb yak around no worries. Not real sure how much punch out from hover it has as I havn't really tested it properly. Ain't really ready for to much 3D action yet. The thing will pull vertical no probs. The one thing I don't like is the lowest stable idle at 2300-2400rpm. My plane moves around to fast during taxying. I don't know if I'm way off the mark here, but those of you having running troubles using the NGK plug, just try put the torch one back in and see what happens. For some reason mine ran terrible with the NGK so I currently use the torch.