FlyingGiants - View Single Post

rdgood · 10-13-2008, 08:23 PM

Man oh Man I wish!!!!!!!!!!!!!!!!!

That's a pretty tall order!!

Dalton or a probuilt Carden!!

Check out Mike3CD's 40% SD Yak..

I will tell you it is extremely difficult to get any 37.5 to 40%er to come out at 36 lbs...

Everything as lite as can possibly be and Carbon everywhere!! its not impossible just alot of mods that you or a pro will proabably have to do...

now with that said -

The Comp Arf Giles 202 will come out at about 37ish with DA-150(its on the small side of 40%) and no Smoke tank stuff - no pipes.. Because it is small as 40%ers go it's wingloading is kinda high. Probably not the best 3D machine in the world but IMAC vert penetration is good - rudder coupling is less but its still there not as bad as Extra's though... G202 is not what I would recommend for unlimited though good enough for Advanced - IMHO.....

Just some ideas...IMHO...

Ronster

10-13-2008, 08:23 PM	#4
rdgood Bad-ass Super Contributer! Join Date: Jan 2006 Location: Portland Oregon Age: 52 Posts: 1,502	Re: ARF for 150cc Around 36 LBS. Man oh Man I wish!!!!!!!!!!!!!!!!! That's a pretty tall order!! Dalton or a probuilt Carden!! Check out Mike3CD's 40% SD Yak.. I will tell you it is extremely difficult to get any 37.5 to 40%er to come out at 36 lbs... Everything as lite as can possibly be and Carbon everywhere!! its not impossible just alot of mods that you or a pro will proabably have to do... now with that said - The Comp Arf Giles 202 will come out at about 37ish with DA-150(its on the small side of 40%) and no Smoke tank stuff - no pipes.. Because it is small as 40%ers go it's wingloading is kinda high. Probably not the best 3D machine in the world but IMAC vert penetration is good - rudder coupling is less but its still there not as bad as Extra's though... G202 is not what I would recommend for unlimited though good enough for Advanced - IMHO..... Just some ideas...IMHO... Ronster