FlyingGiants - View Single Post

MadDuc · 12-01-2008, 03:28 AM

Nice Edge Jason. Not sure whether this is going to help you, but I usually prefer to receive more info than less..... even if it is half applicable...

I am currently building a Lanier Laser 200 33%, wingspan 2,44m, suggestion from the manual is a ZG62 or similar. When gathering info for this plane, I found these links:

http://www.rcuniverse.com/forum/m_7622912/tm.htm
In post number 6 from Yukon Bob you will find that he had the best results with the GT80 on the Lanier Laser.

http://www.rcgroups.com/forums/showthread.php?t=514018
with a nice video, flying great with a 3W75us

and in this thread:
http://www.flyinggiants.com/forums/f...ser-200-a.html
a lot of people running a 75-80cc as well. In post #6 Fearless Flyer says he can hover his Laser with 3W75iUS at less than 1/2 throttle with a 26x10 menz prop.

and this one:
http://www.rcuniverse.com/forum/m_3502508/tm.htm
hovers at just half throttle with a ZDZ80

I know this is a different plane, but since an Edge is a newer model, I would expect it to be lighter than the Lanier Laser 200, so you should have plenty of power. I am still in the rebuilding phase of my Laser (which had a couple of owners before me) and based upon the threads above I decided to go for the GT-80, found one that later appeared to be a ZG-74, but I will try this engine on the plane.

Did you see this review of the H9 33% Edge? http://www.rcuniverse.com/magazine/a...article_id=474

Good luck in your hunt for information!

12-01-2008, 03:28 AM	#2
MadDuc Gettin' Lower! Join Date: May 2007 Location: Netherlands Posts: 69	Re: H9 33% edge 540 feedback Nice Edge Jason. Not sure whether this is going to help you, but I usually prefer to receive more info than less..... even if it is half applicable... I am currently building a Lanier Laser 200 33%, wingspan 2,44m, suggestion from the manual is a ZG62 or similar. When gathering info for this plane, I found these links: http://www.rcuniverse.com/forum/m_7622912/tm.htm In post number 6 from Yukon Bob you will find that he had the best results with the GT80 on the Lanier Laser. http://www.rcgroups.com/forums/showthread.php?t=514018 with a nice video, flying great with a 3W75us and in this thread: http://www.flyinggiants.com/forums/f...ser-200-a.html a lot of people running a 75-80cc as well. In post #6 Fearless Flyer says he can hover his Laser with 3W75iUS at less than 1/2 throttle with a 26x10 menz prop. and this one: http://www.rcuniverse.com/forum/m_3502508/tm.htm hovers at just half throttle with a ZDZ80 I know this is a different plane, but since an Edge is a newer model, I would expect it to be lighter than the Lanier Laser 200, so you should have plenty of power. I am still in the rebuilding phase of my Laser (which had a couple of owners before me) and based upon the threads above I decided to go for the GT-80, found one that later appeared to be a ZG-74, but I will try this engine on the plane. Did you see this review of the H9 33% Edge? http://www.rcuniverse.com/magazine/a...article_id=474 Good luck in your hunt for information!