FlyingGiants - View Single Post

RCAddiction · 12-25-2008, 02:10 PM

Yes, I've done this. Just make sure that you are getting enough power to your RX to support the demands of your aircraft, if you aren't using a Power Expander.

One option when you run out of slots, is to Y the power to 2 different spots on the RX bus. For instance, on Futaba 8 ch, if you don't have a dedicated battery slot left, you can Y the power to Ch 3 (throttle) and to Ch 7 (ignition kill). Of course make sure that you are using heavy duty Y connectors to the battery.

12-25-2008, 02:10 PM	#2
RCAddiction Bad-ass Super Contributer! Join Date: Jan 2006 Location: Wesley Chapel, NC, USA Posts: 435	Re: SmartFly Ignition Kill On Y Connector Yes, I've done this. Just make sure that you are getting enough power to your RX to support the demands of your aircraft, if you aren't using a Power Expander. One option when you run out of slots, is to Y the power to 2 different spots on the RX bus. For instance, on Futaba 8 ch, if you don't have a dedicated battery slot left, you can Y the power to Ch 3 (throttle) and to Ch 7 (ignition kill). Of course make sure that you are using heavy duty Y connectors to the battery. __________________ Lee