FlyingGiants - View Single Post

airborne33 · 02-04-2009, 06:21 PM

I recently got the AW 90-1.20 and the CRRC Pro 26.I ran 10 tanks through the engine on a test bench and so far the engine is fine.I did have to change my ignition moduel,don't know what I did for that to happen.This is my first gasser.We've had some very windy days in the Bahamas lately so I just had the yak in the air for a few minutes,but the combo is great! Jody at valley view rc will be more than happy to help you out I'm sure.
When mounting the engine to the firewall I used 1/4'' spacers from valley view and 45mm evolution standoffs from advantage hobby,which gave 5 11/16''.According to the AW manual this is the required distance from the front of the firewall to the front of the engine prop hub(back of the spinner). Give Jody a call,I think you'll enjoy this combo.

02-04-2009, 06:21 PM	#3
airborne33 Romans 8:28 Join Date: Aug 2008 Location: Freeport, Bahamas Posts: 171	Re: Areoworks Yak and 26cc crrc Pro I recently got the AW 90-1.20 and the CRRC Pro 26.I ran 10 tanks through the engine on a test bench and so far the engine is fine.I did have to change my ignition moduel,don't know what I did for that to happen.This is my first gasser.We've had some very windy days in the Bahamas lately so I just had the yak in the air for a few minutes,but the combo is great! Jody at valley view rc will be more than happy to help you out I'm sure. When mounting the engine to the firewall I used 1/4'' spacers from valley view and 45mm evolution standoffs from advantage hobby,which gave 5 11/16''.According to the AW manual this is the required distance from the front of the firewall to the front of the engine prop hub(back of the spinner). Give Jody a call,I think you'll enjoy this combo.