Here's a little progress on the wings.
I glued on the nose and the rear of the wing:
And the root-rib, which I fixated while the lot was on the tube, properly fitted to the fuse. So everything will line up. The rib set I bought is from a Flugwerf 2m Funtana, which is close to the EMHW, but not identical. Fitting the root rib conform the Flugwerf plans would have resulted in the rib not being parrallel to the fuse side:
And I'm considering my options for the airleron linkage. The ribs are prepared to have the servos fitted (2 openings, I plan on using only the inner one):
I think it's possible to route the linkage through the rear wall of the wing, and keep is all (almost) invisible within the thickness of the wing. That's the idea. I found the idea here:
http://www.flyinggiants.com/forums/f...tml#post643251
But more info is greatly appriciated. Especially how the control rods are connected to the airleron itself I would be very interested in.
Cheers,
Hugo