FlyingGiants - View Single Post

Don Sinclair · 05-08-2009, 10:15 AM

Hi, there are 2 regulators on the EQ6. One non-adjustable 5 volt regulator for the receiver and one adjustable regulator for the servos. Shorting the pins adjusts the servo supply voltage as measured at a servo channel. Hope this helps.

05-08-2009, 10:15 AM	#2
Don Sinclair Flyin' Around Join Date: Aug 2008 Posts: 1	Re: EQ6 increasing RX voltage..... Hi, there are 2 regulators on the EQ6. One non-adjustable 5 volt regulator for the receiver and one adjustable regulator for the servos. Shorting the pins adjusts the servo supply voltage as measured at a servo channel. Hope this helps.