FlyingGiants - View Single Post - Can SmartFly Ignition Cutoff unit handle 7.4V?

Mr.Willow · 07-04-2009, 06:55 AM

Hi
Here's my problem:
I'll be running a 2s lipo via regulator for the ignition. However the reg switches itself off when not used for more than 5 minutes and cn be turned back on by disconnecting and connecting power. So if I connected the switch between reg and ignition, the switch would get 5V, but the reg would shut down and I would need to open the canopy to connect it back (no mechanical switches for ignition).

So in a nutshell- can I connect the smartfly ignition cutoff between 2s lipo and reg? I suppose it can handle it cause it's just a switch, but I wanted to make sure

Thanks!

Chris

07-04-2009, 06:55 AM	#1
Mr.Willow Metallized™ Join Date: Mar 2009 Location: Latvia, Riga Age: 21 Posts: 67	Can SmartFly Ignition Cutoff unit handle 7.4V? Hi Here's my problem: I'll be running a 2s lipo via regulator for the ignition. However the reg switches itself off when not used for more than 5 minutes and cn be turned back on by disconnecting and connecting power. So if I connected the switch between reg and ignition, the switch would get 5V, but the reg would shut down and I would need to open the canopy to connect it back (no mechanical switches for ignition). So in a nutshell- can I connect the smartfly ignition cutoff between 2s lipo and reg? I suppose it can handle it cause it's just a switch, but I wanted to make sure Thanks! Chris __________________ [EF 110" Yak][Mintor 110R][HS7955TG][X9303 2.4][SmartFly][Dubro][SWB]