Dave, Yes I got the files you sent, Thanks. All the CNC files are ready, Rough cut material is ready. I had a few things came up that took priority over my hobby, but hang in there progress is being made. If everything goes as I planned it to, I should have something neat to show everyone about this plane. for materials, here is what I used.1/16" x 3" balsa = 8@24" and
3@16". 1/8" x 3" balsa = 4@24". 1/4" x 3" balsa =
2@8 3/4". 1/4" sq. balsa, I estimate that 6-8 sticks @ 36" will be fine. I also used a scrap section of 1/8" ply, and a 1.25" x 5.75" section of 1/16"ply. you will also need a small section of 1/4" sq. spruce.