|
|
|
|
|
|
|
The following is what I've been told:
The radio system refreshes the servo positions in sequence. Not positive about JR but I heard futaba used to do all odds then all even channels?
Example
(1-3-5-7-9-2-4-6-8) (1-3-5-7-9-2-4-6-8) (1-3-5-7-9-2-4-6-8)
So if you had for example one servo on 1 and the other on 6 you've got a good bit of lag between those. Having one or both reversed can make the situation worse. Keep in mind this was most noticed in the 9c etc which already had 140ms of latency. The elevator matching was ugly sometimes. |
|
|
|
|
I'm going to have to look at what channels I have my elevator plugged into as I fight the same problem