FlyingGiants - View Single Post

3D-Seth · 10-23-2009, 02:17 PM

How much of a lag is there? Does it do it both directions (up and down, or just down)? And are you sure its lag, or are they just in different places in the middle of your travel? Try moving the stick to 3/4 deflection, and see if the halves stay apart, or if the laggy one eventually matches up to the other one. Definitely try swapping channels and see if it moves or not. If it doesn't move, I would suspect your power system to be the problem.

Seth

10-23-2009, 02:17 PM	#6
3D-Seth Horizon Hobby Employee Join Date: Jan 2006 Location: Champaign, IL Age: 21 Posts: 3,077	Re: Lagging Servo? How much of a lag is there? Does it do it both directions (up and down, or just down)? And are you sure its lag, or are they just in different places in the middle of your travel? Try moving the stick to 3/4 deflection, and see if the halves stay apart, or if the laggy one eventually matches up to the other one. Definitely try swapping channels and see if it moves or not. If it doesn't move, I would suspect your power system to be the problem. Seth __________________ Horizon Hobby Desert Aircraft AeroGraphix Duralite Flight Systems Vess Propellers