FlyingGiants - View Single Post

ppdloc · 11-03-2009, 02:32 AM

I had just built a new EDGE 540T from CMP airplanes with a DA50 and put 5,5min, flights on it. all was fine then i started to see the 3D abilitys.About 3mins into the 6th flight i started simple in and out snap rolls. The 7th snap is when the wing broke off about 2-1/2in, from the fuselage. We know what happen next. I found there was almost no glue on the ribs in the wing. But lesson learned.

11-03-2009, 02:32 AM	#1
ppdloc Flyin' Around Join Date: Sep 2009 Posts: 8	Edge 540t I had just built a new EDGE 540T from CMP airplanes with a DA50 and put 5,5min, flights on it. all was fine then i started to see the 3D abilitys.About 3mins into the 6th flight i started simple in and out snap rolls. The 7th snap is when the wing broke off about 2-1/2in, from the fuselage. We know what happen next. I found there was almost no glue on the ribs in the wing. But lesson learned.