FlyingGiants - View Single Post - Great Planes Matt Chapman 1/3 scale Cap 580 ARF

Jkoch713 · 11-19-2009, 09:38 AM

If the wingtube fits, you can easily make holes with a 1/8th plywood reinforcement on the side of the fuse...

If I can fit a pair of FUntana 100X wings on a GOldberg Yak 68" you can fit a pair of those wings on the cap.

The only issue would be the gap between the fuse and the wing root.... THis must be a TIght fit or you will bend
the wingtube and loose a wing IF you FLy to the max of the plane...
This can easily be done with some wood glued to the wing root, to take up ANY slack...

I know what you mean though, You want measuments so that you can put it together with minnum hastle...

You want to fit a pair of the gen 2 wings to a gen 1 fuse right??

11-19-2009, 09:38 AM	#39
Jkoch713 Hermit Join Date: Jan 2008 Posts: 1,006	Re: Great Planes Matt Chapman 1/3 scale Cap 580 ARF If the wingtube fits, you can easily make holes with a 1/8th plywood reinforcement on the side of the fuse... If I can fit a pair of FUntana 100X wings on a GOldberg Yak 68" you can fit a pair of those wings on the cap. The only issue would be the gap between the fuse and the wing root.... THis must be a TIght fit or you will bend the wingtube and loose a wing IF you FLy to the max of the plane... This can easily be done with some wood glued to the wing root, to take up ANY slack... I know what you mean though, You want measuments so that you can put it together with minnum hastle... You want to fit a pair of the gen 2 wings to a gen 1 fuse right??