about half years ago we change all our piston retainer to C clip (cheak pic )
cos very few person has issue like Matt has on his retainer, And we throw all the old piston away make new one for c retainer cos we don't want it happen at all.

Originally Posted by Matt Wheeler

red line from day 0 on. Stihl or Bel ray MC1 or H1R have all produced the same results. Break in after 2-3 gallons and then lean the needles when all of the sudden they got rich and you are done.

yeah,thats the way I am going from here on in.i just wanted a faster breakin than the synthetic give you.
I have used Redline before for breakin but after four gals. the ring still showed signs of not being seated yet,still had dark spots on the face of ring.
I buy Redline by the gal. sense I like using 32-1 ratio.on the back of the jug it even says not to be used for breakin.but sooner or later it will breakin it will just take more time.

I use 40:1 Penzoil Air cooled for 3 gallons on the small engines and 5 gallons on the large ones before switching to Synth. A NON Synthetic oil will provide a quicker break in. However you absolutely need to allow the cylinder/s to cool completly between flights so they will contract in size and provide you with maxmium friction and contact.

Originally Posted by KoleDeRacer

Haha thanks guys. Sorry Robinsp, I usually get way to busy at Nall, I personally apologize I did not realize it happened nothing to do with any planes.

No dude, no need to apologize, let me clarify .

I was pissed because I didn't have time to get to talk to you dude. First timer in shock also. Believe me if I show up to an event with my plane and fly it strangers tend to come talk to me. I fly like I act. I don't f around you might say. I'm all business trying to blend nice slow low 3d with puninhing wot aerobatics. still haven't figured how to break my 88 inch EF edge and I try every time I fly!

I wasn't saying anything bad...
I have a funky sense of humor, get used to it.

GP 123 V2 was not out 6 months ago, therefore all V2's should have that ^^?

What does it mean for the daily fliers here, don't fix what ain't broke, or take matters of pre caution and fix it before it breaks a plane?

Originally Posted by Zi-Chun Lin

about half years ago we change all our piston retainer to C clip (cheak pic )
cos very few person has issue like Matt has on his retainer, And we throw all the old piston away make new one for c retainer cos we don't want it happen at all.

You worry too much!
Even with old retainer there are only less than 2% has this issue!

Originally Posted by Zi-Chun Lin

You worry too much!
Even with old retainer there are only less than 2% has this issue!

Is there any chance you may be coming out with a smaller cc (35) in the near future????

Originally Posted by rboyer224

Is there any chance you may be coming out with a smaller cc (35) in the near future????

Maybe!!!!!

Originally Posted by robbinsp

No dude, no need to apologize, let me clarify .

I was pissed because I didn't have time to get to talk to you dude. First timer in shock also. Believe me if I show up to an event with my plane and fly it strangers tend to come talk to me. I fly like I act. I don't f around you might say. I'm all business trying to blend nice slow low 3d with puninhing wot aerobatics. still haven't figured how to break my 88 inch EF edge and I try every time I fly!

I wasn't saying anything bad...
I have a funky sense of humor, get used to it.

Funky is an interesting way of putting it robbins

Originally Posted by Zi-Chun Lin

Maybe!!!!!

May I pre-order???????? Have a plane I'm building that could be a beta!!!

Or a 70 twin with angled plugs! Instant PayPal transaction here!

Um..............not that fast !!!!!!

Originally Posted by andersoneric04

Or a 70 twin with angled plugs! Instant PayPal transaction here!

+1

Originally Posted by nebwake

Funky is an interesting way of putting it robbins

what are you saying? i know i sound like a prick but no one here can see my smile!
so here:

thats me

Originally Posted by Zi-Chun Lin

Um..............not that fast !!!!!!

how fast then?

It will be some time to conduct full testing.

Originally Posted by KoleDeRacer

It will be some time to conduct full testing.

So you're saying there's a chance!! Does he already have one and it just needs testing, or you're just saying that when it's built, it will need time for testing? I'll gladly beta one if you need. I'm right here in Southeast Texas so I could send parts back and forth as needed. Plus, I'm going to buy a new 35cc extra or slick that will need an engine anyway.