Anyone run the new canned exhaust? What are some real numbers being seen on the new exhaust?

I have the canister and two in one header,but haven't run it yet.
What's the deal on who will be handling the MT engines? And what about service for the guy's who bought them???

Originally Posted by gargajm

I have the canister and two in one header,but haven't run it yet.
What's the deal on who will be handling the MT engines? And what about service for the guy's who bought them???

Reports on RCU had the engine spinning 6000 rpm on the can and a 23X8. About 600 rpm loss over the stock exhaust.

The quality control was not getting better so VVRC dropped them. Jody will service engines he sold, but he didn't sell any 70's. Good luck getting anything repaired correctly with Jack and Tomy

Originally Posted by skypilot_one

Reports on RCU had the engine spinning 6000 rpm on the can and a 23X8. About 600 rpm loss over the stock exhaust.

The quality control was not getting better so VVRC dropped them. Jody will service engines he sold, but he didn't sell any 70's. Good luck getting anything repaired correctly with Jack and Tomy

I bought it (70 twin) from Jody and Tomy at Toledo this last spring. I hope they will take care of me??

Originally Posted by skypilot_one

Reports on RCU had the engine spinning 6000 rpm on the can and a 23X8. About 600 rpm loss over the stock exhaust.

The quality control was not getting better so VVRC dropped them. Jody will service engines he sold, but he didn't sell any 70's. Good luck getting anything repaired correctly with Jack and Tomy

I hope they will take care of it I bought it from them at Toredo last spring. Jody and Tomy where there in person.

I used to go to the Toledo Expo every year. The last 5 years I have not made it there. Maybe this year! Capt,n

Originally Posted by gargajm

I hope they will take care of it I bought it from them at Toredo last spring. Jody and Tomy where there in person.

It is my understanding Tomy was in the VVRC booth. Freeloader all the way!

You bought it from Tomy at the Toledo show. Jody never sold the 70.

Originally Posted by skypilot_one

It is my understanding Tomy was in the VVRC booth. Freeloader all the way!

You bought it from Tomy at the Toledo show. Jody never sold the 70.

Most you said are on the contrary way . I know some people like do random speech . and not responsible for what they say . Be careful and check what you say before post it . free speech not mean say somethings you did not know or L......

Originally Posted by tomyrcmodels

Most you said are on the contrary way . I know some people like do random speech . and not responsible for what they say . Be careful and check what you say before post it . free speech not mean say somethings you did not know or L......

Tomy,

I have never said anything publicly that was not true. You on the other hand.....

Would you like me to post photos of the quality engine you sent me, here on Flying Giants?

Better yet I will direct everyone to the threads on RCU.

http://www.rcuniverse.com/forum/m_10...m.htm#10025548

http://www.rcuniverse.com/forum/m_94...16/key_/tm.htm

can check Toledo show list . to see if VVRC have booth there . .and Jody never sold MT70? call him if you like

I guess Jody can clear this up, if he chooses to do so. I see you are selling the 70 and 70s engines on your website at reduced prices. Are these the same engines Jody refused to sell do to low quality, improper assembly and defective/substandard parts?

Jody not need to clear your BS. why should Jody do this ?

Originally Posted by tomyrcmodels

Jody not need to clear your BS. why should Jody do this ?

BS, yes. Mine no.

People can read the threads, view photos and come to thier own conclusions about you, MT engines and MT engines usa.

Originally Posted by tomyrcmodels

can check Toledo show list . to see if VVRC have booth there . .and Jody never sold MT70? call him if you like

What ever booth it was he was in it and I talked to him directly about the engine.

Jody was invited to our booth because we are talking about cooprate to improve engines and VVRC are going to marketing MT engine in that time. that's why Jody are in our booth . thanks Jody .he give me lot of help and good advice about how to improve our design and make better small engine . sure we will take care of all engines we sold.