Hey guys I was going to use the SF Battshare with My JR 921 2.4 in my TFGS Corsair. I will be running 2 2400 NIMH 6.0 volt batteries in this setup. Is their anything in the set up I should be looking out for ? Should I plug one lead into the batt port on the rec. and the other lead into Aux 4 which is free ? Any help would be appreciated trying to avoid unwanted surprises. Thanks, Kevin.

I know that on the PE it states not to plug any of the port into the battery channel. There have been instances of it causing a rebind or similar type situation. Since that came out I have stopped plugging anything in the battery/bind port regardless if I use a PE or Battshare or just a plain battery. That way nothing can be perceived as a bind plug.

Just my thoughts and not those of SF

Hi,
With the BatShare you can plug into any battery port on your receiver. The BatShare is different than the connections on the PowerExpanders and PowerSystems, on these you do not want to plug into any battery ports because they also try to tap a servo output and if plugged into a bind port this confuses the receiver (pretty much only JR and Spektrum because of the way they bind).