Originally Posted by Gus155

Hey I got some S75 eflite servos. could gang about 6 on the rudder, 4 on each elevator and 5 on each aileron

That will work fine, I just need to get about nine or ten match boxes and we should be good to go!


3D-Boogy, good luck with the maiden.

Originally Posted by damien

That will work fine, I just need to get about nine or ten match boxes and we should be good to go!


3D-Boogy, good luck with the maiden.

Since I stopped Smoking, match boxes last me a lot longer. got some match boxes too.

Allo boiys

Hey warren

Maybe bring your edge down to the feild on saterday when you come and we can help you with it

See ya

Jason

Hi Jason,

I see you back, I have no news on the saito for you unfortunatly. I'll have to get back to you on monday if it is still available...
Sorry.
regards
Andreas

weather looks ok for tomorrow.
Sunday, whoa, SLOPE

Originally Posted by 3D-Boogy

Thanks Boet,

She ready and packed in the trailer for the maiden this weekend!!!
The other one that you are refering to was the 28% Midwest CAP with the one piece wing in the same colours.
This is my own design as you know with split wings, can't wait till tomorrow.

Good luck and try to get it on video !

BB

enjoy the flying at ZF this weekend everybody.
Trevor, I want pictures and Video and presents and...............lots!

Andreas

Hey andreas,Ive been writing exams all day,its not a problem

Originally Posted by jasonflier

hey trev
the problem that you had with your 65 and the glitching servo stoping it from starting
could that not have been what was happening with the 100 at robertson?

Nope didn't have a choke servo then

Originally Posted by driesbabe

Trevor,
Are you getting more top end out the 65 with the Can?
Oh, and yes, the Extra is the one with the Carbon and Bags, it's one very nice ARF.
I know the dealer that you are talking about, and I have heard this.

About your choke closing, I had it hapen to me on my KMP Yak on sunday in the air, Snapped it very hard, tryed to open the Throttle and nothing.......O-oh had to land it down wind, almost pooped my broekkie. All went well though.

Just in case you are wondering, the 90cc is not running as it should, It starts god, and low and midrange are fine, but setting those two carbs is an absoulute pain.....We got 6200RPM on a 24X8 Menz S Wednesday, thats less than my 65cc. Timing is way of, only about 10 degrees BTDC so that will make a huge diff. once that is sorted and then the one large carb is on its way........Hoping that will make things better. As it is now, you never get both Cyliders the same, one is either rich or lean. Very difficult to find out witch is witch.
We will win it though.
regards
Andreas

Hey Andreas
I dont actually know if im getting more but I will check with Damien's tach tomorow and let you know but to me it feels as though its pulling a little more

Originally Posted by driesbabe

enjoy the flying at ZF this weekend everybody.
Trevor, I want pictures and Video and presents and...............lots!

Andreas

I am sure there will be someone there with a cam there usualy is when we fly
but just incase I will take one with myself but don't be dissapointed I know from past experiance that filming and flying at the same time dont work very well. LOL

I will be sure to get footage and edit and post it for all you guys to see.

Trev

[quote=driesbabe;252080]Trevor,
Are you getting more top end out the 65 with the Can?
Oh, and yes, the Extra is the one with the Carbon and Bags, it's one very nice ARF.
I know the dealer that you are talking about, and I have heard this.

Really what have you heard?

Well now they apparently wana fit some black coloured ing box to it. Have you seen theese units. Im very confused cause they said they were going to fit the same one as the GR PRO engines use and thats the RC EXEL.

Trev

Hey good day at the vlei today. flew my nuts off (and the top of the rudder )

Just a pic of the one side of the progress of the edge,the other pics didnt come out so good so ill take some more tomorrow

P.S. sorry about the quality

Looks like rubbish in the pic but its actually smooth and straight and will look like new once it is covered

Originally Posted by jasonflier

Just a pic of the one side of the progress of the edge,the other pics didnt come out so good so ill take some more tomorrow

P.S. sorry about the quality

Looks like rubbish in the pic but its actually smooth and straight and will look like new once it is covered

Well done J it looks good