i CG'd tonight...1 oz. tail heavy at 6.5 inches (1/4 inch short of spec) with 2 "no BS" square battery pacs mounted under the servo tray...I am happy i do not have to move...this will be a good starting point

Looks good Rick !!! I can't tell by the pics but did you make a hole for future adjustments on the carb ???

yES...i did not find a grommet yet but will look this weekend...just wrapped bats and secured them along w ignition... going thru nuts and bolts now...will be ready for test flight!!!!
way pumped

hey guys,
anyone know where the name for this plane derived from(including the full scale plane)??
and what the correct pronounciation is?? iv been having a local debate..

bradp... check out www.sloair.com. They produce the full scale ships, the Sbach 300 (single seater) and Sbach 342.

Steinbach...Sbach for short.

Hey Rick I am going with the same set up as you DLE 55 (with can) and Hitec 7955s. Still waiting for the plane. Can you tell me the length of the servo extensions that you used for the Sbach.

rudder:
elevators:
Wings:
Throttle:

I want to have all the parts here for when it finally arrives when ever that will be. By the way looks like you did a good job setting her up. Thanks Ken

I like the looks of the Sbach

I am just a beginner in the sport. So, thanx for the vote of confidence... I used 2-36" on elevators. 2-12" and 2-6" on ailerons. None needed on rudder. None on throttle. Used 2-6" for charge jacks. Keep in mind where I located the rx... I also used a JR R922 rx with olnly power switch for both bats. ( actually only cuts power to rx) hope this helps and send pics as you can!!!
Rick

here's some info on steinbach:
http://www.haute-voltige.com/wings_o...steinbach.html

could you post a pict of your tailwheel install? in particular , the spring that connects to the rudder...

Thanks thats great.

I get my sbach 342 50c.c about month ago....And start install last weekend....Almost done now.What I impressive is the plane is very light with 3mm 53 engine The flying weight is about 7KG!!!
This plane will fly like dream!!!!!!!

Two servos in the elevator or just one? The online 50cc manual refers to one. If two, I gotta go get one more, lol! Thanks for the extension info.

Originally Posted by Revy

Two servos in the elevator or just one? The online 50cc manual refers to one. If two, I gotta go get one more, lol! Thanks for the extension info.

You need two servos for elevator!

Doh!